The aim of this study was to investigate how seasonal variations affect the quality of Logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of Logging residues. In these systems the handling of the Logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of Logging residues are strongly dependent on moisture content in storage.

This study was carried out at the request of the bio energy company Naturbränsle. The company handles annually 750 000 m3 of chips from Logging residues from a large area, from Östergötland in the south to Härjedalen in the north. In that area, about 50 bio fuel plants are customers. When Naturbränsle deliver chips from Logging residues to their customers, the moisture content varies from 30 % to 60 %. The aim of the study was to sort out the affecting factors on the moisture content in the chips during handling and storage processes.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the Logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and Logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. Logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the Logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

This study was carried out at the request of the Swedish forest company Sveaskog which is an important producer of Logging residues (branches and tops) intended for energy production. The company wanted to increase the average dry content to 60 percent in their delivered Logging residues. At the time when this study was initiated, the dry content in the chipped Logging residues originating from the Bergslagen district was at 52 percent. The aim of the study was to find out how windrows of Logging residues could be arranged in order to help obtain desired properties such as increased dry content. Sveaskog had developed a system for evaluation of windrows and a standardized form was utilized to describe different properties of the windrows.

A high amount of dead wood is one of the most important prerequisites for high biodiversity on forest land in Sweden. Dead wood is most abundant in young forests, thinned forests, woodland key habitats and protected forest land. In old-growth forests most of the dead wood consists of logs and snags, whilst in managed forests a huge proportion of dead wood is made up of Logging residues like stumps and FWD, fine woody debris (< 10 cm diameter). All these different types of dead wood may serve as substrates for epixylic bryophytes and lichens. However, few studies have been conducted on the relative importance of these different fractions of dead wood for the occurrence of bryophytes and lichens, especially when considering dead wood on thinned forest land.

Scania provides a fleet management system for hauliers who want to control their fleets in anefficient way. The system includes an onboard computer with touch screen called ScaniaInteractor where the driver can access GPS navigation, order support, message service and otherfunctionalities. The purpose of this thesis is to develop a concept for logging the user interactionon the Interactor and analyze the result which enables further development and optimization ofthe interface.A demonstration application is designed, implemented and tested for the purpose of showing thepossibilities and difficulties with logging of interaction. The result shows that logging is quiteeasy to implement and that the amount of produced data is small and therefore not expensive totransfer via GPRS to a central server where searching and analysis can be done. On the otherhand, the biggest challenge lies in the analysis and interpretation of the logged data and to applyit to the development of the interface.

Biofuels are getting more important as EU plans to replace fossil fuels with renewable energy sources. Because of that Sveaskog has chosen to invest in developing the handling process of logging residue. The company has a joined organisation for handling both round wood and logging residue. They are also working at integrating the forwarding of the logging residue with the rest of the harvesting team. Sveaskog is currently extracting 44 % of the available amount of logging residue.

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

During some time there has been a debate whether or not logging contractors? profitability can be considered poor. The contractors? situation is important for maintaining long term relationships and continuity in the forest industry. A thorough analytic picture is however missing.

The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.

This study has analyzed particel size distribution and needle content in chipped logging residuals (branches and tops) delivered to the district heating plant Ryaverket in city of Borås, Sweden. Two fuel assortments has been analyzed: Chipped logging residuals from pure softwood and from mixed fuel (connifers and broadleaves). The samples has been sieved at Linneaus University laboratory.The study of particle sizes indicates that only 53,2 % of delivered fuel is within the fuels specification (7? 45 mm). The needle content is in this study 12,4 % (dry mass) which is higher than expected..

The reduction of coarse, dead wood is considered to be the biggest threat to flora and faunain boreal forests. Extensive harvest of Logging residues would increase this reduction evenmore. However, the role of dead wood created at final felling for boreal, epixylic species isstill largely unclear. It is therefore of interest to examine whether epixylic species inhabit thedead wood in young, boreal stands, especially species considered to be confined to forests inlate successional stages.The aim of this study was to investigate whether forest-interior species in fact can inhabitearly-successional forests arisen after logging. The study was conducted in young standsbordering dead wood rich woodland key habitats.

In this essay, Neolithic potsherds from Alby, Öland has been examined. The purpose was to investigate the connection between the lipid residues and the vessel shapes and ornament. To solve the attempt lipid and morphological analyses were executed. The lipid analysis revealed traces of different food residues and the morphological method showed various shapes and decors. The result indicates that the Alby ceramics has been used for cooking/storage of different fish and meat dishes, as well as vegetables and that the vegetables doesn?t derive of cereals..

This study focuses on the integrity of students at Uppsala University that has used the university?s network, UpUnet. We?ve studied their opinions with the use of questionnaires that cover questions related to privacy and awareness about logging of data traffic.The results showed that more students than our hypothesis suggested were unaware of the surveillance on the network, and the majority of these also had a negative opinion towards logging of data traffic. However, we found that there were several relations between how the students responded on our questionnaire, and we?ve presented these in the analysis chapter towards the end of the essay..